Renogy 12V 200Ah Lithium Iron Phosphate Battery with Bluetooth & Self-Heating Function | Pro Series (AU)

12.8V • 200Ah • 2560Wh (2.56kWh) • M8 terminals

Product Overview

The Renogy Pro Series 12.8V 200Ah Smart LiFePO4 battery (SKU: RBT12200LFP-BT-AU) is a deep cycle lithium battery built for RVs, caravans, 4WD touring, marine systems, and off-grid solar. With Bluetooth monitoring and an automatic self-heating function, it is designed to keep your 12V system reliable across changing conditions, including cold mornings and wet installs.

This battery stores 2560Wh (2.56kWh) of energy and is rated for 5000 cycles at 80% depth of discharge. It uses EV-grade cells plus a smart BMS with 60+ protections and alarms, and it is sealed to an IP67 protection rating for dust and water resistance. It is also a solid option for high-draw loads like inverters, DC-DC charging setups, and many trolling motor and marine accessory systems where stable voltage and strong current delivery matter.

Key Features

Bluetooth monitoring via the DC Home app, so you can check state of charge, voltage, current, and battery status from your phone.
Automatic self-heating function to support charging performance in cold conditions, starting below 5°C and stopping above 10°C when charging current is available.
60+ smart BMS protections and alarms, plus active backup protection using a self-control fuse for fast response to abnormal electrical conditions.
IP67 protection rating and corrosion resistance (ISO 9227) for demanding installs including marine environments and exposed storage locations.
UL94 V-0 flame-retardant casing to reduce fire risk and improve safety in enclosed power bays.
Designed for parallel expansion up to 8 batteries for higher Ah capacity at 12.8V when you need longer runtimes.

Technical Specifications

Battery Chemistry

Lithium Iron Phosphate (LiFePO4)

Nominal Voltage

12.8V

Rated Capacity

200Ah (0.5C, 25°C)

Energy

2560Wh (2.56kWh)

Cycle Life

5000 cycles (80% DOD, 80% EOL)

Voltage Range

10V to 14.8V

Charge Voltage (setpoint)

14.4V (±0.2V)

Max Continuous Charge Current

200A

Max Continuous Discharge Current

200A

Peak Discharge Current

270A (30s)

Operating Temperature (Charge)

-20°C to 55°C

Operating Temperature (Discharge)

-20°C to 60°C

Storage Temperature

-25°C to 65°C

Protection Rating

IP67

Bluetooth Monitoring

DC Home app compatible

Connection Method

Parallel only (up to 8 batteries)

Self-Heating Operation

Starts below 5°C and stops above 10°C (requires stable charge current above 6A per battery)

Dimensions (L × W × H)

467 × 212 × 208 mm

Approx. Weight

23 kg

Terminal Type

M8 (bolts included)

Recommended Terminal Torque

8 N·m

Certifications

UL, MSDS, UN38.3, FCC, CE, PSE, UKCA

Warranty

7-year prorated material and workmanship warranty

Installation Clearance (guide)

Allow 50-100 mm above the battery and at least 200 mm on the busbar side

Why Choose Renogy 12V 200Ah Pro?

Battery specs matter because they determine what your system can actually run. The 2560Wh energy rating helps estimate runtime for fridges, lighting, comms, and inverter loads, while the 200A continuous charge and discharge capability supports higher-demand setups without being pushed to the edge. This is especially important in RV and marine builds where you may be charging from solar, alternator (DC-DC), or mains, and drawing power for inverters and 12V distribution at the same time.

The Pro Series focus is protection and usability. IP67 sealing, corrosion resistance, a flame-retardant casing, and the double active safety design are aimed at real installs where vibration, heat, moisture, and user error can happen. Bluetooth monitoring and the self-heating function reduce the guesswork in daily use, particularly for winter trips, alpine camping, or boats that see cold early starts.

Voltage	12
Amp Hour	200
Length MM	467
Width MM	212
Height MM	208
Warranty	84
Post type	M8
Battery Type	Lithium LiFePO4
Weight KG	23
Model #	RBT12200LFP-BT-AU

Be The First To Review This Product!

Help other Archer Batteries Pty Ltd users shop smarter by writing reviews for products you have purchased.

Write a product review

Battery basics and suitability

Q: What is the Renogy 12V 200Ah Pro Series battery with Bluetooth and self-heating designed for?

It is a deep cycle 12V battery designed for caravans, RVs, 4WD touring, marine systems, and off-grid solar. The Pro Series adds Bluetooth monitoring and automatic self-heating to help keep charging and everyday use simple, even when temperatures drop.

Q: How much energy is in a 12V 200Ah lithium battery?

A 12.8V 200Ah LiFePO4 battery stores about 2560Wh of energy, which is roughly 2.56kWh. Real runtime depends on your total load, inverter efficiency, and how deeply you discharge the battery before recharging.

Q: Is it suitable for running an inverter?

Yes, it suits many inverter setups because LiFePO4 holds voltage well under load. Check that your inverter continuous and surge demand are within the battery and BMS limits, and use correctly sized cable with clean, tight terminal connections.

Q: Can it be used as a trolling motor battery?

It can suit many 12V trolling motors because it can deliver high current with stable voltage. Confirm your motor maximum current draw is within the battery discharge ratings, and size cabling to minimise voltage drop on longer runs.

Charging and system setup

Q: What chargers and charging sources can I use with this battery?

You can charge it from solar using a lithium compatible regulator, from a vehicle alternator using a DC to DC charger, or from mains using a lithium capable AC charger. Set the charger to a LiFePO4 profile and follow Renogy recommended voltage settings for this model to avoid overcharging or undercharging.

Q: How does the self-heating function work while charging?

Self-heating operates when the battery is receiving a charge and the internal temperature is low. Heating typically starts below 5°C and stops above 10°C while charging, helping protect the cells and improve winter charging performance.

Q: Can I connect multiple batteries in parallel to increase capacity?

Yes, you can connect batteries in parallel to increase total capacity while staying at 12V. Use the same cable length and cable size to each battery or to a busbar so current sharing is even, and bring batteries to a similar state of charge before paralleling.

Bluetooth monitoring

Q: What can I see in the Bluetooth app?

Bluetooth monitoring lets you view key battery data such as state of charge, voltage, charge and discharge current, temperature, and active protection alerts. It is useful for confirming your charger settings, spotting unusual load spikes, and checking battery status without opening compartments.

Q: How do I pair the battery to my phone?

Install the Renogy DC Home app, enable Bluetooth on your phone, and stand close to the battery. Select the battery from the device list in the app, then follow the prompts to connect and view live status information.

Care and safety

Q: How should I store the battery when it is not in use?

For storage, disconnect loads, store in a cool dry place, and avoid leaving the battery fully flat for long periods. If it will sit for weeks or months, store it around mid state of charge and check it periodically, then recharge with a lithium compatible charger if needed.