Narva 52707 - Mini Blade Fuse 7.5A (Box of 50)
SKU code: Narva52707
$34.99
In Stock
Narva 52707 - Mini Blade Fuse 7.5A (Box of 50)
Product Overview
Narva 52707 is a 7.5A mini blade fuse for OEM mini panels in modern automotive and marine systems. The brown body follows the standard 7.5A colour code for quick identification. Use as a like-for-like replacement wherever a 7.5A mini fuse is specified on 12V or 24V circuits.
Key Features
- Genuine mini blade footprint for late-model fuse panels
- 7.5A rating with standard brown body for fast identification
- Automotive 32V DC rating for 12V and 24V systems
- Box of 50 for workshops and fleets
- Fast-acting protection for control modules and accessory feeds
Technical Specifications
Brand
Narva
Series / Part No.
Mini Blade / 52707
Fuse Type
Fast-acting mini blade
Form Factor
Mini blade (ATM/mini)
Current Rating
7.5A
Voltage Rating
32V DC
Mounting
Push-fit into mini blade fuse slots
Pack Quantity
50
Colour
Brown
Warranty
12 months
Selection and Fitment Tips
- Match amperage: Replace like-for-like at 7.5A unless the manufacturer specifies otherwise.
- Match the footprint: Mini blade fuses will not fit micro or standard blade slots.
- If it blows again: Diagnose wiring faults or overcurrent rather than upsizing the fuse.
Why Choose Narva 52707?
Correct mini footprint and 7.5A value for many OEM accessory and control circuits. The 50-pack keeps workshops stocked for fast, OEM-spec replacements.
| Model # | 52707 |
| Barcode # | 09314464507076 |
Be The First To Review This Product!
Help other Archer Batteries Pty Ltd users shop smarter by writing reviews for products you have purchased.
What is Narva 52707?
A box of 50 genuine Narva 7.5A mini blade fuses for OEM mini fuse panels.
What colour is a 7.5A mini blade fuse?
Brown, per standard automotive colour coding. Always confirm the printed value before fitting.
What voltage rating applies to these fuses?
32V DC, suitable for 12V and 24V automotive systems in the correct mini slot or holder.
Do mini blade fuses fit micro or standard blade slots?
No. Always match the footprint to the panel. Mini blade is different from micro and standard blade sizes.
Are these fast-acting or time-delay fuses?
Fast-acting. If a new fuse pops immediately, check for shorts or overcurrent rather than increasing the value.
Typical uses for 7.5A mini blade fuses?
Medium low-current circuits such as control modules, lighting and accessory feeds where the maker specifies 7.5A.
Which holders or adaptors can I use with these fuses?
Narva 54412BL in-line mini holder and 54408BL add-a-circuit are suitable options.
Can I upsize to 10A if a 7.5A keeps blowing?
No. Do not increase the fuse value. Repeated blows indicate a wiring fault or overload that must be fixed first.
How many fuses are in the pack and what is the warranty?
Fifty fuses per box. Warranty is 12 months.
Any installation tips for reliable contact in mini panels?
Power the circuit off, seat the fuse fully, keep the cavity clean and avoid bent blades. If a new fuse blows, verify current draw and inspect wiring before refitting.
