Narva 52703BL - Mini Blade Fuse 3A (Blister 5-Pack)
SKU code: Narva52703BL
$5.50
In Stock
Narva 52703BL - Mini Blade Fuse 3A (Blister 5-Pack)
Product Overview
Narva 52703BL is a retail blister of five 3A mini blade fuses for late model automotive and marine panels that specify the mini footprint. The violet body follows standard colour coding for quick ID. Use as a like-for-like replacement in OEM mini slots on 12V and 24V systems.
Key Features
- Genuine mini blade footprint for modern fuse panels
- 3A rating with standard violet body for fast identification
- Automotive 32V DC rating for 12V and 24V circuits
- Convenient blister 5-pack for glovebox and workshop spares
- Fast-acting protection for low-current electronic circuits
Technical Specifications
Brand
Narva
Series / Part No.
Mini Blade / 52703BL
Fuse Type
Fast-acting mini blade
Form Factor
Mini blade (ATM/mini)
Current Rating
3A
Voltage Rating
32V DC
Mounting
Push-fit into mini blade fuse slots
Pack Quantity
5
Colour
Violet
Warranty
12 months
How to Choose the Right Fuse
- Match amperage: Replace like-for-like at 3A unless the manufacturer specifies otherwise.
- Match the footprint: Mini blade fuses will not fit micro or standard blade slots.
- Investigate repeated blows: Trace wiring and load faults rather than upsizing the fuse value.
Why Choose Narva 52703BL?
Correct mini footprint and 3A value for protecting delicate electronics, supplied in a handy 5-pack for quick OEM-spec replacements.
| Type | Mini Blade |
| Rating | 3 AMP |
| Model # | 52703BL |
| Barcode # | 09314464527036 |
Be The First To Review This Product!
Help other Archer Batteries Pty Ltd users shop smarter by writing reviews for products you have purchased.
What is Narva 52703BL?
A blister 5-pack of genuine Narva 3A mini blade fuses for OEM mini fuse panels.
Where are 3A mini blade fuses commonly used?
Very low-current electronics such as sensor feeds, instrument illumination and comms modules where 3A is specified.
What is the voltage rating of these fuses?
32V DC, suitable for 12V and 24V automotive systems when used in the correct mini slot or holder.
Do mini blade fuses fit micro or standard blade slots?
No. Always match the footprint to the panel. Mini blade is different from micro and standard blade sizes.
Are these fast-acting or time-delay fuses?
Fast-acting. If a new fuse pops immediately, check for shorts or overcurrent rather than increasing the value.
What colour is a 3A mini blade fuse?
Violet per standard automotive colour coding. Always confirm the printed value before fitting.
Which holders or adaptors can I use with these fuses?
Narva 54412BL in-line mini holder and 54408BL add-a-circuit are suitable options.
Can I upsize to 5A if a 3A keeps blowing?
No. Do not increase the fuse value. Repeated blows indicate a wiring fault or overload that must be fixed first.
How many fuses are in the pack and what is the warranty?
Five fuses per blister. Warranty is 12 months.
Any installation tips for reliable contact in mini panels?
Power the circuit off, seat the fuse fully, keep the cavity clean and avoid bent blades. If a new fuse blows, verify current draw and inspect wiring before refitting.
